UltraPlus X-9200HD PVR, User Manual

Page: 11 / 86

11

In case of S2 + S2
[ TUNER 1 ]
1. LNB IN (Caution : LNB1 in on the left bottom)
Satellite IF signal input socket of the first tuner (TUNER 1).
Connects a satellite antenna LNB cable.
2. LNB OUT
Satellite IF signal output socket of the first tuner (TUNER 1).
Connects to a second tuner (TUNER 2) for loop-through.
[ TUNER 2 ]
3. LNB IN (Caution : LNB2 in on the right bottom)
Satellite IF signal input socket of the second tuner (TUNER
2). In the case of a loop-through configuration a short
cable connects LNB Out from the first tuner (TUNER 1) to this connector.
4. LNB OUT
Satellite IF signal output socket of the second tuner (TUNER 2). Can be used to connect to another STB.

In case of T(T2) + T(T2)
[ TUNER 1 ]
1. ANT IN
Terrestrial signal input socket of the first tuner (TUNER 1).
Connects to a UHF aerial.
2. LOOP OUT
Terrestrial signal output socket of the first tuner (TUNER 1).
Connects to a second tuner (TUNER 2) for loop-through.
[ TUNER 2 ]
3. ANT IN
Terrestrial signal input socket of the second tuner (TUNER
2). In the case of a loop-through configuration a short
cable connects Loop Out from the first tuner (TUNER 1) to
this connector.
4. LOOP OUT
Terrestrial signal output socket of the second tuner (TUNER 2). Can be used to connect to another STB.

In case of C + C
[ TUNER 1 ]
1. CABLE IN
Cable signal input socket of the first tuner (TUNER 1).
Connects to a cable TV network.
2. CABLE OUT
Cable signal output socket of the first tuner (TUNER 1).
Connects to a second tuner (TUNER 2) for loop-through.
[ TUNER 2 ]
3. CABLE IN
Cable signal input socket for the second tuner (TUNER 2).
In the case of a loop-through configuration a short cable
connects Cable Out from the first tuner (TUNER 1) to this connector.
4.
CABLE OUT
Cable signal output socket of the second tuner (TUNER 2). Connects to another STB or Cablemodem.