UltraPlus 980HD miCro PVR, User Manual

Page: 40 / 48

40
 Advanced Search Mode :
-
Satellite :
Press the
OK
button to select the target satellite
for search.
-
Frequency :
Select the frequency from the list to search.
-
Symbol rate :
Enter the symbol rate by using the
NUMERIC
buttons.
-
Polarity :
Select the polarity. (
Vertical/Horizontal
)
- Video PID : Enter the video PID using the NUMERIC buttons.
- Audio PID : Enter the audio PID using the NUMERIC buttons.
- PCR PID : Enter the PCR PID using the NUMERIC buttons.
- Transmission : You can select ‘DVB’ and ‘DVB-S2’
- Start Search : Press the OK button to start a search.
3.4 Network Setting
To use a Network connected to the STB Ethernet port, you have
to prepare the STB Network settings. When the STB and a PC are
connected via a network, you can access the files of the STB
storage device such as USB storage device.
NOTE : If you use the DHCP function of router, you can
easily set the network configuration.
 DHCP :
You can select
On/Off
for the Dynamic Host
Configuration Protocol (DHCP) to get all configuration
information from the router.
-
If you select ‘On’
: You will obtain the configuration from the network and be set up automatically.
In this case, the remaining items (
IP Address, Subnet Mask, Gateway, First DNS, Second DNS
) are
automatically set and you don’t have to configure them manually.
-
If you select ‘Off’
: You have to input the configuration manually.
 IP Address, Subnet Mask, Gateway, First DNS, Second DNS :
You can input the address with the
OK
button, NUMERIC buttons and the LEFT/RIGHT buttons. You can move to the next item with the
DOWN button and you can configure the following items in the same way.

Firmware Upgrade Server : This feature is not currently supported It may be available in the future.
 MAC Address :
This will display the MAC address of the STB Ethernet interface and unique to each STB.
 Control of the files via the network and your PC.
- Check the IP Address of the STB on the Network Setting
menu.
- Press Enter button on your PC, after entering the IP Address
in the web browser address line.
Ex.) //168.158.10.146/storage
- You can see the USB folder in the Storage folder.
- You may be able to load and retrieve data between the PC
and the STB via the browser.
3.5 System Recovery
 System restore to factory default :
This menu allows you to
restore the factory set values in case the user has encountered
some problems after changing parameters in error. Press the
OK button to erase all services and restore default setting.
 System restore to stored position :
This menu allows you to
restore the stored values including service data and system
parameters. Press the
OK button to restore all data.