Operating Manual and Service Instructions
ultraMEDIC GmbH & Co. KG - 56567 Neuwied, Germany
36
APPENDIX II
INSTRUCTIONS FOR THE OPTIONAL ultraBELT X-TREME BELT SYSTEM
The special 6-point ultraBELT X-TREME harness was specifically developed to quickly and
securely hold patients in place. With ultraBELT X-TREME it is possible to quickly strap the inju-
red person securely into the basket stretcher and handle even difficult transport situations.
HOW TO FIX THE BELT SYSTEM IN THE BASKET STRETCHER
Fasten the shoulder belts (1) to the two upper loops (A points) of the all-around rope. Loop
the belts to fasten these as shown in the diagram.
The other two belts (2) which are attached to the shoulder belts can be used either as
lap belts (fasten to all-around rope, B points) or as leg belts (fasten to all-around rope, C
points).
If you use the belt as a
lap belt
it will be necessary to use an additional belt to fixate the
feet. If you use the belt as a
leg belt
an additional lap belt is required.
The V-strap is fastened to the loops of the all-around rope.
HOW TO USE THE ultraBELT X-TREME BELT SYSTEM
First release all the belts using the belt releases (3) and then open the belt using the
rotary buckle (4).
Put aside both shoulder belts with lap and leg belts and position the V-strap so that it
points towards the foot end of the basket stretcher.
Lay the patient into the basket stretcher.
Place both shoulder belts (1) over the sides of the patient. The loose belt can now be
fastened into the buckle of the other belt.
Guide the V-strap from underneath between the legs of the injured person and also
buckle it.
Close the additional lap or leg belt (see above).
All belts can then be tightened with the belt tensioner (5).
The patient is now ready for transport.
Summary of Contents for ultraBASKET STRETCHER
Page 2: ......
