background image

PROFILE 

DYNAMIC WHITE

Satety

 

Clamp

6.INSTALLATIONS

Cautions: 

For added protection mount the fixtures in areas 
outside walking paths, seating areas, or in areas were 
the fixture might be reached by unauthorized 
personnel.
Before mounting the fixture to any surface, make sure 
that the installation area can hold a minimum point 
load of 10 times the device’s weight.
Fixture installation must always be secured with a 
secondary safety attachment, such as an appropriate 
safety cable.
Never stand directly below the device when mounting, 
removing, or servicing the fixture.
from a ceiling, or set on a flat level surface (see 
illustration below). Be sure this fixture is kept at least 
0.5m (1.5 f t) away from any flammable materials 
(decoration etc.).
Always use and install the supplied safety cable as a 
safety measure to prevent accidental damage and/or 
injury in the event the clamp fails.

Mounting points: 

Mounting the projector requires extensive experience, 
including amongst others calculating working load 
limits, a fine knowledge of the installation material 
being used, and periodic safety inspection of all 
installation material and the fixture. If you lack these 
qualifications, do not attempt the installation yourself. 
Improper installation can result in bodily injury.
Be sure to complete all rigging and installation 
procedures before connecting the main power cord to 
the appropriate wall outlet.

Safety

 

Cable

05

260

328

Summary of Contents for PROFILE 200 DYNAMIC WHITE Series













Reviews: