11
POST-INSTALLATION:
SPARTAN
POST-INSTALLATION:
1. Route the AV cables into the lift, through cut-out provided for cable management. (See Cable
Management section)
2. If using IR Controller, expose the IR eye in a suitable position to achieve line of sight to the remote.
3. Once Spartan unit is safely secured, refit any removed panels, in reverse order as you took it apart.
4. Extend the plaster to fill the gaps up to the trim panel and around the ceiling cut-out and paint as
necessary.
25
PLASTER TO EDGE
OF TRIM PANEL
170
PLASTER TO EDGE
OF TRIM PANEL
VIEW FROM ROOM
(DIMMENSIONS NOT TAKING INTO ACCOUNT SIDE CLEARANCES)
PLASTER
INFILL AREA
CEILING
PLASTER
