2-2
2.1.1
JAD-832 Controller
If a JAD-832 Controller is connected directly to a COE unit, the JAD-832
must be plugged into a DIA-01 Control Interface Adapter and then the DIA-
01 connected to the input on the COE. The DIA-01 provides the +5V power
required to operate the JAD-832.
DIA-01
to
COE Input
TX+ Black
to
+
TX- Red
to
-
2.1.2
MUX-05 Multiplexer
Up to five JAD-832 Controllers can be connected to a MUX-05 Multiplexer.
Four of the JAD-832 controllers must be plugged into a DIA-01 and then the
DIA-01's are connected to the inputs on rear panel of the MUX-05. One of
the JAD-832 Controllers can be plugged directly into the front panel of the
MUX-05. Then one of the MUX-05 outputs is connected to the COE unit
input.
MUX-05
Channel 2 through 8 Output
to
COE Input
Pin 2, TX+
to
+
Pin 1, TX-
to
-
Pin 3, GND
to
S
Summary of Contents for COE-08
