Step 8: Install Back Panels (#8, #9 and #10)
NOTE:
Step 9: Install Leveling Feet (#6)
Note:
Step 10: Install Corner Protections (#15, #16 and #17)
1) Attach Corner Protection A, B (#15, #16) onto top
and bottom of the cabinet, use 20 pcs Screw N (#54)
to tighten.
2) Attach Middle Corner Protection (#17) to the
middle of Left Side Panel (#1-A) and Right Side Panel
(#2-A), use 8 pcs Screw N (#54) to tighten.
Rotate/Stand Storage Cabinet upright after this step.
Attach Leveling Feet (#6) to the four side corner of
Bottom Panel (#4). Use Wrench (#25) to tighten.
Wheels are not included with this unit, however there
are 4 screw holes built into Bottom Panel (#4) for
installation. Wheels can be purchased at
)
1) Attach Bottom Back Panel (#10) onto both bottom of
Left and Right Side Panels (#1-A2 and #2-A2) and Bottom
Panel (#4). Line up screw holes and use 8 pcs Screw F
(#41) in each corner hole to tighten.
2) Attach both Middle Back Panel (#9) above
Bottom Back Panel (#10) the same way. Place the groove
of the Middle Back Panel (#9) onto the top edge of the
Bottom Back Panel (#10). Use 8 pcs Screw F (#41) to
tighten each corner of the panel.
3) Use 8 pcs Screw F (#41) to install Upper Back Panel (#8)
the same way, with a screw in each corner of the panel.
4) Use 13 pcs of Engineered Nylon Anchors (#63) to
secure the back panels. Press the Engineered Nylon
Anchors into the rest of the holes on the back panels to
fasten.
Do not fully tighten Screw F before the
Engineered Nylon Anchors are secured.
Press the
Engineered Nylon
Anchors into the
holes to fasten
#21
#63
11
UltraHD® Tall 30 in. Storage Cabinet (Model No. 20162, 20163)
*NOTE: We recommend using TWO people to assemble the cabinet.
