Step 4: Install Right Door (#7-A)
Note:
Step 5: Install Key Rod (#7-A3)
Step 6:
Note:
Step 7:
Note:
Attach Bottom Panel (#4) to Left Side Bottom Panel
(#1-A2) and Right Side Bottom Panel (#2-A2), line up
screw holes, use 6 pcs Screw G (#42) to tighten.
Before tightening screws, make sure the bottom
corners of Left Side Bottom Panel and Right Side
Bottom Panels (#1-A2, #2-A2) are completely flushed
with the back and front corners of Bottom Panel (#4).
Before tightening screws, make sure the bottom
corners of Left Side Upper Panel (#1-A1) and Right Side
Upper Panels (#2-A1) are completely flushed with the
back and front corners of Top Panel (#3).
Attach Top Panel (#3) to Left Side Upper Panel (#1-A1)
and Right Side Upper Panel (#2-A1). Make sure the
front of the panel faces downward. Line up screw holes,
use 6 pcs Screw F (#41) to tighten.
Repeat Step 3, use Right Door - Upper Panel (#7-A1),
Right Door - Bottom Panel (#7-A2), Door Panel
Connection Part (#6-A3). Use 1 pc Screw F (#41) to
tighten the touching sides, use 4 pcs Screw F (#41) to
tighten from the top touching side, and 4 pcs Screw K
(#52) to tighten from outside edge.
Make sure the Right Door - Upper Panel (#7-A1) is
flushed with Right Door - Bottom Panel (#7-A2).
Attach and insert Key Rod (#7-A3) into the bottom tab
hole of Right Door - Bottom Panel (#7-A2). Twist out the
pre-assembled Screw L (#53) on the key rod linkage
plate. Attach Key Rod (#7-A3) by lining up the screw
hole and tightening back in the Screw L (#53).
Install Top Panel (#3) to Left Side Upper Panel (#1-A1)
and Right Side Upper Panel (#2-A1)
Install Bottom Panel (#4) to Left Side Bottom Panel
(#1-A2) and Right Side Bottom Panel (#2-A2)
Back
Front
Back
Front
10
UltraHD® Tall 30 in. Storage Cabinet (Model No. 20162, 20163)
*NOTE: We recommend using TWO people to assemble the cabinet.
