Ultraflux UF 831, User Manual, Page: 34 / 109

34
NT UF 831 CO GB (b) / March 2014
2) Serial link settings (connection)
Enter the JBUS number of the flow meter (number assigned to the flow meter and to which it will respond
on a Modbus query).
3) Transmission speed (bitrate)
Enter the transmission speed that you wish to apply.
4) Display language
The possible display languages are: French, English, Spanish, German, Italian, Portuguese and Russian.
5) Station's name
Each flow meter can be assigned a label with up to 8 characters (registration number). The position of the
current character is chosen using the
▼
and
▲
keys. To scroll through the characters, use the < and >
keys.
6) Back light
The possible options are:
 ON: the back light is on for one minute after pressing any key, then remains dimly lit,

TIMED: the back light is on for one minute after pressing any key, then goes off,
 OFF: No back light.
7) Timer before return to “Measurement” mode
The flow meter automatically returns to Measurement mode after approximately one minute. The modified
settings will then be taken into account. This avoids the risk of forgetting to exit Paramétrage
(Configuration) mode and needing to intervene again on the flow meter to return to Measurement mode.
8) Loading and saving a configuration (option files)
The current configuration of the flow meter can be saved directly in the flow meter, or on a PC. Up to 11
configurations can be saved, numbered from 1 to 11.
To save the current configuration on the flow meter, select the
configuration number under which you wish to save it. The saving of the
configuration is then validated when passing to another menu page or
following an extended press of the Fn key.
To recall a configuration, enter the configuration number and validate this
choice by passing to another menu page.