NT214B GB1
5 / 26
1-2 - The clamp on solution
is available for most of the liquids flowing in metallic or plastic
pipes.
Ultraflux offers a very wide transducers range with different sizes and frequencies to be
selected depending on the application and pipe diameter from 10 mm I.D. to more than 3
metres.
This solution is very convenient for petrochemical products but also for any water quality
including demineralised water with no limitation from the conductivity.
When pipe wall material (concrete …) or condition ( corrosion …) is not suitable for clamp
on transducers , we propose insertion transducers with installation possibility by hot tapping.
When the instrument must have an official use, it is recommended to compare it to a
standard and obtain a calibration certificate on a flow rig.
Then, after some reserves concerning a correct use, the unit can be accepted as a
secondary standard.
Basically, we practice a dry calibration. It reliability is sufficient for a standard use.
Beside its accuracy, MiniSonic P offers a very good reproducibility.
If you place transducers at the same location and enter the same settings, you can follow
up in the time any pump characteristics or any other flowmeter actual accuracy.
Example with Direct mode
:
Meanwhile, Reflex mode (V)
Is more usual ( > 90 % )
and much more easy l.
