Installation and Maintenance Manual
PUMP FOR HYDRAULIC SYSTEMS -
page
23
3.4.2 Bleeding procedure
Perform the bleeding procedure as described in the installation and maintenance manual relating to
the UC81 cylinder, finally get a proper oil level by turning the steering wheel 1/2 turn and letting the
oil bleed from the valve. Close the valve and perform a check of the system.
Once the filling and bleeding procedures are performed reposition the cap (1) and apply the supplied
adhesive.
3.4.3 General recommendations
DANGER
It is very important to make sure that the air is completely purged from the system before
using your boat! We recommend to try manually move the engine/s or helm/s right and left,
paying attention to any movement of the cylinder rod.
An excessive relative movement between the body and the cylinder rod means there is air to be
purged. The presence of air in the system can lead to incorrect controls, with the consequent risk
of damage, injury or death.
WARNING
Check, by moving the pump, the system responds promptly.
DANGER
After 24 hours, repeat the bleeding procedure and make sure there are no leaks.
1
ENGLISH
