background image

Installation and Maintenance Manual

 

page 6 

of 23  -  

HYDRAULIC CYLINDER FOR SIDE MOUNT APPLICATIONS

3. Limitations. 

THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS SHALL BE PURCHASER'S SOLE AND

EXCLUSIVE REMEDY AND 

UFLEX 

USA, INC,'S SOLE AND EXCLUSIVE LIABILITY UNDER THIS WARRANTY.

LABOR FOR REPLACEMENT IS NOT INCLUDED. 

UFLEX

 USA, Inc.'s obligation under this warranty is limited

to the repair or replacement (at 

UFLEX

 USA, Inc.'s sole election) of any covered item found to be defective,

when  delivered  by  Purchaser  pursuant  to  written  authorization  and  instructions  from 

UFLEX 

USA,  Inc.,

shipping  prepaid  to 

UFLEX

  USA,  Inc.'s  plant  or  other  designated  repair  facility.  Repaired  or  replaced

items  are  warranted  as  provided  herein  for  the  unexpired  portion  of  the  applicable  warranty  period.

THIS WARRANTY, AND THE RIGHTS AND REMEDIES UNDER IT, IS EXCLUSIVE AND IS GIVEN IN PLACE OF

ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, WHETHER ARISING BY LAW, CUSTOM,

CONDUCT OR USAGE OF TRADE, PURCHASER'S REMEDIES SHALL BE LIMITED AS STATED HEREIN AND

UFLEX

 USA, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES

OR LOSSES RESULTING FROM DEFECTS. THE RETAIL SELLER IS NOT A CO-WARRANTOR AND IS NOT

AUTHORIZED BY

 UFLEX

 

USA, INC. TO AMEND OR MODIFY THIS LIMITED WARRANTY IN ANY MANNER.

4.  Transferability  of  Warranty. 

This  limited  warranty  may  not  be  transferred  to  subsequent  purchasers.

5.  Miscellaneous.

 

UFLEX

  USA,  Inc.  is  an  affiliate  of 

ULTRAFLEX 

S.p.A. 

UFLEX

,  USA,  Inc.,  reserves  the  right  to

make changes in the design and construction of its  products at any time, without notice and without any

obligation  to  incorporate  such  changes  into  products  of  prior  manufacture.  This  limited  warranty  applies

to new components sold by 

UFLEX

 USA, Inc.. This limited warranty contains the entire agreements between

UFLEX

  USA,  Inc.  and  Purchaser  and  supersedes  all  prior  agreements,  discussions,  negotiations,

commitments  and  representations,  whether  oral  or  written,  between  them  regarding 

UFLEX

  USA,  Inc's

warranty.  If  any  provision  of  this  limited  warranty,  or  the  application  of  it,  is  determined  to  be  invalid  of

unenforceable  for  any  reason,  the  remainder  of  this  limited  warranty  and  the  application  of  it  shall  not

be  affected.

All  communications  and  notices  from  Purchaser  regarding  this  limited  warranty  should  be  sent  to: 

UFLEX

USA, INC., 6442 Parkland Drive, Sarasota, FL 34243; (941) 351-2628.

Return policy

Any  product  that  is  presumed  defective  should  be  reported  to 

UFLEX 

USA  within  48  hours  of  receipt  or

discovery in the field. Upon notification 

UFLEX 

USA will attempt to troubleshoot the problem with our customer

over  the  phone.  If  we  are  unable  to  resolve  the  problem 

UFLEX

  will  issue  a  Return  Goods  Authorization

number  and  we  require  that  the  product  in  question  be  returned  to 

UFLEX

  with  all  its  parts  in  its  original

packaging.  The  product  should  be  returned  freight  prepaid  to:

UFLEX USA

RGA Department - RGA #

6442  Parkland  Drive

Sarasota,  Florida  34243

Upon receipt

 UFLEX

 will examine the product to determine the cause of the defect. If the product is determined

to  have  a  defect  in  workmanship  or  material,  it  will  be  repaired  at  our  discretion.

Our  warranty does  not cover  labor,  towing or  other expenses.  Further, it  does  not cover  products that  have

been  improperly  installed,  damaged  in  installation,  misapplied,  or  misused.

Our  products  are  not  intended  for  use  in  racing  applications.

Summary of Contents for UC 68-OBS

























Reviews: