F.
G For Jumper 251, every eight holes attach a spring to the corresponding eyelets. For even distribution of the tension and
C1, B1 then D1, etc. In addition to the previously attached springs, you should have springs at ZERO, A1, A, B1, B, C1, C and D1
as shown in FIGURE 7.
UltraFit
ZERO
ZERO
C
A
A
1
D
1
B
1
C
1
A
C
B
B
FIGURE 6
FIGURE 7
For Jumper 251 count 12 holes from Point ZERO on the top bars and the corresponding eyeletsto move on to Point12.
Attach a spring to this point, as shown in FIGURE 6. By this time you should have attached four spring to the points ZERO,
A, B and C. This even distribution of the tension is important for the correct and easy assembly of the trampoline mat,
as shown in FIGURE 6.
