manualshive.com logo in svg

Ultradent Products GEMINIEVO 810 DIODE LASE, User Manual

Share
Download
Ultradent Products GEMINIEVO 810 DIODE LASE User Manual Download Page 23

23

PRESET

TIP LIGHT

SOUND

VOICE

MENU

WI-FI

ACTIVE

STBY

AIMING

UPDATE

HOME

8 1 0

9 8 0

D U A L

HAPTIC

10 - AIMING LIGHT

To change the aiming light intensity, touch the MENU and then the AIMING icon on the Guided Touch Interface. Adjust 

the aiming light level by touching the Up / Down arrows. To exit, touch the MENU icon to save your selection. The 

system remembers the last used sound setting when it is powered on. When UP arrow disappears, this indicates the 

setting is all the way to max and vice versa. Icon shows Red when OFF. 

PRESET

TIP LIGHT

SOUND

VOICE

MENU

WI-FI

ACTIVE

STBY

AIMING

UPDATE

HOME

8 1 0

9 8 0

D U A L

HAPTIC

CONTROLS, OPERATION & USE

09- SOUND

To change the sound level, touch the MENU and then the SOUND icon on the Guided Touch Interface. Adjust the 

sound level by touching the Up / Down arrows. To exit, touch the MENU icon to save your selection. The system 

remembers the last used sound setting when it is powered on. When UP arrow disappears, this indicates the volume 

is all the way to max and vice versa. Icon shows Red when OFF. 

Voice Confirmation can be enabled and disabled by touching the voice confirmation selection on the Guided 

Touch Interface. Red icon shows disabled and Green enabled. 

Summary of Contents for GEMINIEVO 810 DIODE LASE









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands