manualshive.com logo in svg

Ultradent Products GEMINIEVO 810 DIODE LASE, User Manual

Share
Download
Ultradent Products GEMINIEVO 810 DIODE LASE User Manual Download Page 13

QUICK START

Plug In Power Supply

During initial setup use the AC/DC power supply for at least one hour to fully 

charge the battery. Plug the power supply into an AC outlet and connect to the 

corresponding connector on the rear of the system.

2.

Insert AA Batteries into Activation Pedal

Install the (2) provided AA batteries into the wireless activation pedal.  

When replacing the AA batteries, we recommend an ALKALINE type battery.

3.

Turn Laser Unit ON

The Universal ON/OFF button is a membrane switch which requires pressure  

“click” in order to be activated.

4.

Enter Electronic Key Passcode

Enter the electronic key passcode on the Guided Touch Interface using the  

Up and Down arrow keys. The security code sequence is 

UP, DOWN, UP, DOWN

.  

A checkmark icon will appear when the correct key is input.

5.

Select Your Desired Wavelength

Select the desired laser wavelength on the Guided Touch Interface:
810 nm, Dual or 980 nm Wavelength. 

6.

Select Your Desired Power Setting

Select your desired power setting, then activate the laser. (Pages 17-21)

7.

Download the mobile App

1.

PRESET

TIP LIGHT

SOUND

VOICE

MENU

WI-FI

ACTIVE

STBY

AIMING

UPDATE

HOME

8 1 0

9 8 0

D U A L

HAPTIC

“Please select wavelength”

Summary of Contents for GEMINIEVO 810 DIODE LASE









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands