Maintenance
Restore Factory Default: Restore camera settings. Choose “Keep Network Settings” to keep IP settings after
restoration.
Firmware Update
(1) Unzip and put the IP Camera OS “.rom” file into the root directory of the prepared USB drive. Please make sure
that it is the only one “.rom” file in the root directory.
(2) Please
Insert the USB drive into either port in the front side of NVR. Do not use the rear one because it will be
recognized as an extend HDD
(3) Wait until NVR shows “USB Check OK!
Setup
Main Menu
Setup
Maintenance:
the NVR settings can be perfromed with the below 3 types of acti.
Load Factory Default: restore all NVR settings to the default
Backup Settings (to USB): store the current NVR settings, so it can be applied to another unit of NVR.
Restore Settings (from USB): restore settings based on the stored backup settings
Language:
The NVR supports 21 version of OSD language: English, Spanish, French, Italian, Russian, Danish, Swedish, Finnish,
Czech, Dutch, Deutsch, Polish, Hebrew, T-Chinese, S-Chinese, Japanese, Thai, Vietnamese, Korean, Turkish and
Portuguese.
Fan Speed:
The lower the fan speed, the quieter the fan sound, but the higher the HDD temperature, vice versa.
Sequence Time:
For sequence displaying, the dwelling time (before displaying next group) can be set.
Video Out:
