Step 2:
Check the box to select a camera device from the list. The following operations will be applied on it.
Step 3:
The selected NVR may have been assigned a valid IP address via DHCP server. It can also be manually given an IP
address. To do so, click on “Set IP” button. In the pop-up “Set IP” window, input the IP, Subnet Mask and Gateway. Input
account info if NVR is password protected
Step 4:
Click on the “Browse” button. This will launch an IE browser and link to the NVR web page immediately.
Discovering devices in Windows Network
The NVR can be discovered in “Windows Network” of a client PC when it is connected in a network with DHCP and
UPnP services available. See the figure below.
Right-click on the device and select “Properties”, the pop-up window shows all the information related to the device,
including the web access info. Use the web address to connect to the NVR. Or simply double-click on the selected
device, which gets immediately access to the NVR webpage.
