background image

Alarm Functions

Starter Disable

 (optional)

The system will interrupt  the vehicles starter when the system is 
armed and allow the vehicle to start when the system is disarmed.

Ignition Auto Locks 

(optional)

1) The system will 

lock

 the doors 2 seconds after the ignition key is    

     turned to the “on” position.
2) The system will 

unlock

 the doors when the ignition key is turned 

      to the “off” position.

Ignition 

On/Off

Passive Arming

 (optional)

The system will automatically 

arm

 and lock (optional) the doors 30 seconds 

after the last door is closed. It may also be programmed to 

arm

 and lock 

(optional) the doors if the    button is pressed and a door is not opened.

Dome Light Supervision

 (optional)

The system will activate the dome light for 30 seconds when the    button is 
pressed. 

NOTE:

 Dome light will shut off after 30 sec. or until the key is turned “ON”. 

Car Finder Mode

 (not available on the 670)

1. Press and hold the    button for three seconds. 
2. The park lights will flash and the siren will chirp five times to draw attention to    
    the location of the vehicle. 

PAGE 5                                                                                          

OWNER’S  MANUAL

False Alarm Circuit

The system is designed to prevent ongoing shock sensor triggers. If the shock
sensor is triggered more then 3 times within one hour the system will ignore the
sensor until the alarm is disarmed then armed again.

Summary of Contents for 606 Series

















Reviews: