background image

PAGE 3                                                                                          

OWNER’S  MANUAL

  

Disarm System

1.Press and release the    button on the remote transmitter.
2.The park lights will flash and the siren will chirp two times.*
3.The doors will unlock (optional).
4.The LEDs on the antenna will stop flashing.

* If the system was triggered, the system will respond with two park light flashes   
   and three siren chirps.

 See Page 9 for Diagnostics

.

NOTE:

 If the system is triggered, example: 

opening the door before disarming

            the system.

 The first press and hold of    disables the siren 

ONLY!

 

            A second press and release of    disarms the system.

Priority Unlock Feature

 (optional)

1. Press and release the    button on the remote transmitter. The park lights will
    flash, the siren will chirp two times and the drivers door  will unlock.
2. Press and release the    button again and the remaining doors will unlock.

NOTE:

 The    must be pressed a second time within 3sec (606/640 series),

            press and release    a second after 3sec (660/670 series).

Arm System

1. Press and release the    button on the remote transmitter. 
2. The park lights will flash and the siren will chirp one time. 
3. The doors will lock (optional).
4. The LEDs on the antenna will start flashing within five seconds.

Alarm Functions

 

 

 

 

 

 

  

Silent Arm and Disarm

Press and release the    and    buttons simultaneously. 

If the system was armed this will disarm the system. 
The park lights will flash twice 

without siren chirps 

as confirmation.

If the system was disarmed, this will arm the system. 
The park lights will flash one  time 

without siren chirps 

as confirmation.

Summary of Contents for 606 Series

















Reviews: