VIII. Battery Use, Care and Maintenance
For the proper use, maintenance and storage of this battery, it is crucially important that
you read and understand the instructions given in this manual.
WARNING: Failure to properly use, charge and store this battery will void the
warranty, and may cause a hazardous situation. DO NOT use this battery with any
other vehicle or appliance. Use of this battery with any other product will void the
warranty, and may create a hazardous condition that could cause a fire resulting in
severe injury or death, and property damage.
If you have any questions about this battery or its usage, please do not hesitate to contact
the Customer Service Department at Ultra Motor at (415) 693-3110.
WARNING: Never short circuit the discharge terminals of the battery. A short
circuit will damage the battery and could cause a fire resulting in severe injury or
death, and property damage.
CAUTION: Keep the battery away from excessive heat and/or open flames. Avoid
long term exposure to direct rays from the sun.
CAUTION: Protect the battery from water or other moisture. If the battery
becomes wet from rain during use, dry it as soon as possible. Remove the battery
from the electric bicycle before washing the bicycle.
CAUTION: To avoid damage to the battery, never subject it to intense physical
shock or severe vibration.
Charging Instructions
WARNING: Use only the battery charger supplied with this battery. If you use any
other battery charger, you will void the warranty, you may damage the battery and
you could cause a fire that would result in property damage and possible injury or
death.
•
Check the Voltage Selector switch on the charger to insure that it is set to your
local line voltage (110 volts for the United States).
•
Plug the charger into the wall outlet.
•
Ensure that the battery Power Switch is switched OFF before connecting the
charger to the battery.
•
Rotate the charger port cover port on the side of the battery housing clockwise or
counter clockwise to expose the charger receptacle.
•
Carefully align the connector pins and connect the charger to the battery by
plugging the connector into the charger receptacle.
•
Turn ON the charger using the ON/OFF switch on the charger.
26
