ID Card Printer – User Manual
ID Card Printer – User Manual
- 13 -
This feature enables you to select whether cards should be fed into the printer
from the Card hopper (at the rear of the printer), or by hand (one-
at-a-time) from the front of the printer. There are 2 settings:-
Hand feed
[OFF] - This is the default setting. Cards will be fed
automatically from the card hopper.
[ON] – At the start of each print the printer will request
you to feed a card through the card feed slot in the front of
the printer.
Note: Cards will not be fed from the card hopper.
Once the desired mode is
selected, press the [Save]
button
Press the [Change] button
to toggle the mode between
[ON] and [OFF]
When Hand Feed mode is set to [ON] the printer will
prompt you when it is time to place a card through
the card feed slot in the front of the printer.
It will flash the display and show a text
message......
