ULTIMATE WASHER ES320AIR Operator'S Manual Download Page 8

8

 

DETERGENT CLEANING PRECAUTIONS:

1.

DO NOT use solvents or highly corrosive detergents or acid type cleaners
with this pressure washer.

2.

,/08:063%&5&3(&/54#FQSFQBSFEUPUFMMBQIZTJDJBOFYBDUMZXIBU

you are using in the event of an emergency.  Read the Material Safety
Data Sheet (MSDS) provided with your detergent and all detergent labels.
Follow all appropriate instructions regarding preparation use, safety and
transportation.  Keep ALL detergents out of the reach of children.

3.

DO NOT use this pressure washer to dispense hazardous detergents.

4.

DO NOT alter the detergent injection feature in any manner not prescribed
in this manual.  Use only genuine  replacement parts for necessary
repairs.

MISCELLANEOUS SAFETY PRECAUTIONS:

1.

NEVER ALLOW CHILDREN OR ADOLESCENTS TO OPERATE THIS UNIT!

2.

Read and follow all handling, operations, maintenance and safety instructions

 

listed in this manual  and provide such information to ANYONE who will 
be operating

 

this unit.

3.

In freezing temperatures, the unit must always be warm enough to ensure

 

there is no ice formation in the pump.  DO NOT start this unit if it has been

 

USBOTQPSUFEJOBOPQFOPSVOEFSIFBUFEWFIJDMFXJUIPVUåSTUBMMPXJOHUIF

 

pump to thaw.

4.

When connecting the water inlet to the water supply mains, local regulations 
of your water company must be observed.  In some areas the unit must

 

not be connected directly to the public drinking water supply.  This is to

 

ensure that there is no feedback of the detergents into the water supply.

 

 %JSFDUDPOOFDUJPOJTQFSNJUUFEJGBCBDLæPXQSFWFOUFSJTJOTUBMMFE

5.

DO NOT allow any part of your body or the high pressure hose to make

 

DPOUBDUXJUIUIFNVGæFS"WPJEESBHHJOHUIFIPTFPWFSBOBCSBTJWFTVSGB

DF

 

such as cement.  This causes wear and eventual rupturing.

6.

High pressure hoses should be inspected daily for signs of wear.  If evidence 
of failure exists, promptly replace all suspect hoses to prevent the possibility 

PGJOKVSZGSPNUIFIJHIQSFTTVSFTQSBZ*GBIPTFPSåUUJOHJTMFBLJOH/&7

&3

 

place your hand directly on the leak.

7.

DO NOT operate the unit without all protective covers in place.

8.

NEVER run the unit with the governor disconnected or operate at excessive 
speeds.

9.

To reduce the risk of injury, maintain a safe distance for persons while

 

operating this unit.  Close supervision is necessary when operating the unit

 

near children.

10.

DO NOT leave pressurized unit unattended.  Shut off the unit and release

 

trapped pressure before leaving.

11.

DO NOT move the unit by pulling on the hose.

IMPORTANT SAFETY WARNINGS

Revision 11/3/2021

Summary of Contents for ES320AIR




















Reviews: