Ultimate Technology 600 POS, User Manual

Page: 37 / 81

Series 600 POS Keyboard
32
FUNCTION
CODE
PARAMETER DEFAULT
SETTING
(XXh = Hex
Code in
ASCII)
REMARKS
30 RS232 Port 1 Baud Rate 9600 Baud Rate Used to select a baud rate for Port 1. Baud
rates available are: 300, 600, 1200, 2400, 4800,
9600, 19200, 38400 and 57600.
31 RS232 Port 1 Stop Bits 2 stop bits Used to select number of stop bits, 1 or 2, used
with Port 1.
32 RS232 Port 1 Parity No parity Used to select parity used with Port 1.
Selections available are: no parity, odd parity or
even parity.
33 RS232 Port 1 Handshaking Both Used to select method of handshaking used
with Port 1. Selections available are: none,
CTS/RTS, XON/XOFF or both.
34 RS232 Port 1 Word Length 8 bits Used to change the word length, 7 or 8 bits, of
the data at Port 1.
35 RS232 Port 1 Prefix None Used to place a prefix before a packet of data
before it is sent out of the keyboard Main Port.
36 RS232 Port 1 Suffix <CR> (0Dh) Used to place a suffix after the packet of data
before it is sent out of the keyboard Main Port.
38 Keyswitch Position 1 MAKE k1+ Used to program the MAKE codes of the
keyswitch. When the key is turned into position
1, the switch can send macros and/or perform
an internal secure (lock).
3 9 Keyswitch Position 1 BREAK k 1 - U s e d t o p r o g r a m t h e B R E A K c o d e s o f t h e
keyswitch. When the key is turned out of
p o s i t i o n 1 , t h e s w i t c h c a n s e n d m a c r o s
a n d / o r p e r f o r m a n i n t e r n a l s e c u r e ( l o c k ) .
4 0 Keyswitch Position 2 MAKE k2+ U s e d t o p r o g r a m t h e M A K E c o d e s o f t h e
k e y s w i t c h . W h e n t h e k e y i s t u r n e d i n t o
p o s i t i o n 2 , t h e s w i t c h c a n s e n d m a c r o s
a n d / o r p e r f o r m a n i n t e r n a l s e c u r e ( l o c k ) .
4 1 K e y s w i t c h P o s i t i o n 2 B R EAK k 2 - U s e d t o p r o g r a m t h e B R E A K c o d e s o f t h e
keyswitch. When the key is turned out of
p o s i t i o n 2 , t h e s w i t c h c a n s e n d m a c r o s
a n d / o r p e r f o r m a n i n t e r n a l s e c u r e ( l o c k ) .
4 2 Keyswitch Position 3 MAKE k3+ U s e d t o p r o g r a m t h e M A K E c o d e s o f t h e
keyswitch. Wh e n t h e k e y i s t u r n e d i n t o
p o s i t i o n 3 , t h e s w i t c h c a n s e n d m a c r o s
a n d / o r p e r f o r m a n i n t e r n a l s e c u r e ( l o c k ) .
4 3 Keyswitch Position 3 BREAK k 3 - U s e d t o p r o g r a m t h e B R E A K c o d e s o f t h e
keyswitch. When the key is turned out of
p o s i t i o n 3 , t h e s w i t c h c a n s e n d m a c r o s
a n d / o r p e r f o r m a n i n t e r n a l s e c u r e ( l o c k ) .