Series 600 POS Keyboard
25
Table 2. Local Mode Programming Instructions
* = Default Settings
Function Code(s)
Operation
Normal Indication
Remarks
45
46
47
48
Drawer 1
Open (45)
Closed (46)
Drawer (2)
Open (47)
Closed (48)
1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
numeric keypad, enter applicable Function Code
45, 46, 47,
or
48
.
LED (2) flashes.
2. At the auxiliary keyboard, type the desired key or type the desired key sequence.
Note that the maximum number of key codes is limited to 24 – this is equivalent to
approximately 12 keystrokes.
If the Series 600 Keyboard beeps and
LED (2) turns off while entering key
codes at the auxiliary keyboard, you
have exceeded 24 key codes. Repeat
steps 1 and 2.
3. At the Series 600 Keyboard, press
ENTER
.
LED (2) turns off.
4. Program the next function code or exit programming mode by entering
99
on Series
600 Keyboard numeric keypad or by swiping the Program Card.
49
Poll
Unsolicited
Cash Drawer Status
1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
numeric keypad, enter Function Code
49
.
LED (2) turns on.
2. At Series 600 Keyboard numeric keypad, enter the applicable number (0 or 1) to
select status method per list below.
0 = Send on change or transition
1 = Send only with poll command CDSTATUS
LED (2) turns off.
3. Program the next function code or exit programming mode by entering
99
on Series
600 keyboard numeric keypad or by swiping the Program Card.
