ULTIMATE SPEED ULGD 5.0 B1, Original Instructions Manual

Page: 24 / 198

23 GB/CY
Program 3 , "12 V", (14.4 V / 5.0 A)
To charge 12 V batteries with a capacity of
14 Ah – 120 Ah.
Press the program selector button
11
to select Program 3.
The symbol
5
is shown in the LC display. During the
charging process, the charging display
8
flashes and
shows how far the charging process has progressed (1 – 4
bars). When the battery is fully charged, the status display
9
shows 4 bars. The flashing stops and the device
switches to trickle charging automatically.
Program 4
,
"12 V", (14.7 V / 5.0 A)
To charge 12 V batteries with a capacity of
14 Ah – 120 Ah under cold conditions or to charge AGM
batteries.
Press the program selector button
11
to select Program 4.
Note:
This program starts, with a slight time delay if necessary.
The symbol
6
is shown in the LC display. During the
charging process, the charging display
8
flashes and
shows how far the charging process has progressed
(1 – 4 bars). When the battery is fully charged, the status
display
9
shows 4 bars. The flashing stops and the device
switches to trickle charging automatically.
Trickle charging
As described in "Selecting programs", the device has an
automatic trickle charging procedure. Depending on the
drop in voltage in the battery – through self-discharge –
the charger reacts with different levels of charging current.
The battery can remain connected to the charger over a
longer period of time.
Using the device