37
GB
6.2
Selecting a programme
There are 8 programmes (MODE 1 – 8)
available altogether. The programmes vary
in their intensity, the area massaged and the
massage rhythm.
1. Press the MODE programme button
5
.
2. The illumination of the remote control
will be activated.
3. Press the MODE programme button
5
again.
The appliance switches to the next pro-
gramme and the motors start to work.
The selected programme number is
shown in the LCD display
3
.
6.3
Switching the heater on
and off
1. Press the heat button
7
.
The illumination of the remote control
will be activated.
2. Switch the heater on by pressing the
heat button
7
again.
Heat will now be produced from inside
the massage mat.
3. To switch the heater off, press the heat
button
7
again.
7. Cleaning and main-
tenance
7.1
Cleaning the appliance
To ensure your product gives you lasting ser-
vice, you should clean it regularly.
DANGER
!
To avoid the dan-
ger of an electric shock or
damage:
- Always disconnect the power supply
before cleaning.
- Never immerse the machine in water.
- Never allow water or cleaning agent
to run into the machine.
~
CAUTION:
Never use caustic or abra-
sive cleaning agents, as they could
damage the parts.
1. Unplug the power plug
11
from the
power socket
10
.
2. Clean the massage mat
1
with a
clothes brush.
3. If badly soiled, clean the massage
mat
1
as well as the remote control
9
with a damp cloth. You could also use
a little mild washing-up liquid.
4. Wipe off with clean water.
5. Do not use the appliance again until it
is fully dry.
7.2
Changing the fuse in
the car lead
There is a fuse in the car lead
12
to protect
the car’s electrical system. If there is no pow-
er supply and the car lead
12
stops work-
ing, you should check and, if applicable,
change this fuse.
1. Unscrew the cap on the top of the car
lead
12
.
2. Remove the fuse.
3. Insert a new type F3AL 250V fuse.
4. Screw the car lead
12
together again.
BB&3(B$XWRPDVVDJHB%ERRN6HLWH'RQQHUVWDJ-XOL
