Page
3
of
16
Issue: 1
– 03/10/2019
1. Introduction
This User Manual contains instructions for the installation, use and maintenance of the Ultimate
Healthcare Diversi-Foam Hybrid II mattress replacement system. You must read and fully understand
this manual before using the system.
Caution: Ultimate Healthcare shall not be liable for any damage or injury caused by
failure to follow the proper instructions as described in this User Manual.
Caution: Before using the dynamic mattress replacement system all staff must
familiarise themselves thoroughly with the various parts and controls as detailed in
this User Manual.
Note:
Ultimate Healthcare reserves the right to modify the information in this User Manual at any time.
The information in this User Manual may vary slightly with respect to the basic design of the product.
2. Intended Use
The intended use of this product is to prevent and/or manage pressure ulcers while optimising patient
comfort for patients up to 255kg / 40 stone.
This product is intended to be used as a static pressure care mattress and with the use of the pump a
dynamic pressure care mattress.
3. About the Product
The Diversi-Foam Hybrid II mattress replacement system provides highly effective care and protection
for patients at High to Very High Risk of pressure ulcer development and is a cost-effective solution
for any healthcare environment.
A flexible range of features allow the Diversi-Foam Hybrid II to provide individualised patient care. The
system offers both
Dynamic, Static
and
Constant Low Pressure
therapy modes allowing nursing
staff to adjust the therapy and comfort offered to patients.
