1.
This photo shows all the parts needed for the sliderblocks
3.
Put the two parts of the sliding
block next to each other and put
a brass bushing in one of the two
(identical parts).
4.
Put some tension on the
spring lace the timing belt
with the spring in the slider
block. The timing belt comes
out the slots on both sides of
the slider block
5.
Click the two parts of the slider
block together. this is a one-way
mechanisme. Check if everything
is secure.
6.
Repeat this pro-
cedure four times,
this will result in 4
assembled sliding
mechanisms
2.
Place the timing belt around the spring, so the teeth are to the outside.
12
B1.
Sliderblocks
