www.ultega.net
8
US
Step 4
•
Remove 3 x lat washers (17), spring washers
(16) and nylon nuts (18) from saddle (11). Attach
saddle (11) to seat post (4), reit and tighten
ixings.
•
Put sleeve (10) into seat post (4) and then insert
seat post (4) into main frame (1).
•
Remove seat knob (22) from main frame (1),
insert seat post (4) into main frame (1), align
holes and secure seat in position with seat
locking knob (22).
Important Note : Do not extend seat post
beyond maximum mark line.
Step 3
•
Remove 4 x screws (12) from back of computer
(7). Plug Hand pulse wire (20) and Sensor
extension wire (19) into back of computer.
Attached Computer to top of handlebar post (5)
using previously removed screws (12).
•
Attach handlebar (6) onto the handlebar post
(5) using 2 x screws (26).
Note: Remove the battery cover from the
back of computer (7) and insert two AA
batteries (not included). See inside battery
compartment for correct orientation.
ASSEMBLY STEP
7
19
20
20
28
6
26
28
20
7
12
19
5
22
11
4
1
18
16
17
10
