ENKOFORM VMK
Construcción
51
ENKOFORM VMK
4.16.
WALER-VM20 BEAM CLAMP TYPES
There are 2 CLAMPS that make possible to fix the
WALER MK-120 to the BEAM VM20:
WALER-VM20 CLAMP 2T
WALER-VM20 ANGULAR CLAMP
4.16.1
WALER-VM20 CLAMP 2T
General view of the WALER-VM20 CLAMP 2T.
The features of this component are:
The joint between the BEAM VM20 and the
WALER MK-120 makes 90º.
Each joint point between the WALER and BEAM
VM20 will be fixed by means of one WALER-
VM20 CLAMP 2T.
It can be assembled in any point of the WALER
and BEAM VM20, with no need of being
brought in from an end of the VM20 BEAMS.
Two nuts have to be tightened to tie the joint
up.
The nuts are captive.
The assembly of the PANEL can be carried out on
the ground.
Steps for assembling WALER-VM20 CLAMPS 2T:
1.- The BEAMS VM20 are placed on the MK-120
WALERS. The WALER-VM20 CLAMP has to be placed
under the BEAM VM20 to carry out the joint.
2.- The arms of the WALER-VM20 CLAMP have to be
turned outwards.
3.- The WALER-VM20 CLAMP is lift up.
4.- The arms of the WALER-VM20 CLAMP are turned
inwards (it will remain in this position to make the
joint).
Waler MK-120
Beam VM20
