30
Data
and Service information
Safety regulations
The product is CE-marked which means that it fulfills all prescribed requirements that exist to put the product
into work within the EU. ULMA AB disclaims all responsibility that could occur at misuse or wrong use of the
Ulma2000TCA burner.
Technical data
Measurement outside boiler (wxhxd)
227mm x 233mm x 258 mm
Measurement chamberunit (diameter x length) 125 x 220 mm
Combustion efficiency
Approx. 97 %
Given effect at maximum level
30 kW
Tension
230 VAC
Effect consumption (average during operation)
Approx. 100 W
Weight
10 kg
Warranty (see warranty parts)
1 year
Fittings
Overheating protection to the boiler.
Fuel storage.
Warranty conditions
ULMA AB leaves a 1 year warranty on the Ulma ECO 2 pellet burner regarding fabrication faults on ingoing
components. ( Ignition unit 5 year )
The exception are damages caused by lack of maintenance, incorrect handling or deficient installation. The
warranty does not cover damages on persons or other property other than the sold product, not other
consequential damages or indirect occurred damages. Working costs to change components are not included
in the warranty. Ulma AB provides new components at return of defective components within 3 weeks.
Components sent with receiver freight will not be gotten out.
Provided that an authorized installer has mounted or inspected the burner and that warranty/installation
certificate has been sent to ULMA AB no later than 2 weeks after installation.
Yearly service should be made and service reports should be able to be shown at possible complaint.
Otherwise no warranties are valid.
If the retailer has a service agreement with the customer ULMA AB covers the working costs.
The retailer is liable to inform the customer this.
We reserve us the right to construction changes and dissent us from possible printing errors.
Information to the installer
The installation certificates at the end of this manual shall be filled out with correct information. One to the
customer that should be kept in this binder. The other one we would like you to send per mail to ULMA AB. We
also prefer that you enclose a print from the flue gas analysis with date and time of the installation. For you who
do not have access to a printer to your flue gas instrument we ask you to fill out the information in the
installation certificate per hand. If this is not being followed we refer to the warranty conditions what regulations
that are valid. If you mishandle this you are also removed from retailer system and you can no longer sell,
install our products. If you use a different dosage auger brand we would like you to contact us at installation.
Adress information:
ULMA AB
Energigatan 11
SE
– 512 53 Svenljunga, SWEDEN
Phone: +46 (0)325-17680
Webb site:
www.ulma.se
E-mail: [email protected]
Summary of Contents for ECO 2 Premium
Page 1: ...1 INSTALLATION AND MAINTENANCE OF Ulma ECO 2 Premium 30 kW ...
Page 28: ...28 Wiring diagram ...
Page 29: ...29 Drawing ...
