Ulma ECO 2 Premium, Installation And Maintenance Manual

Page: 20 / 33

20
- Tap on to enter the temperature menu
- Tap on to enter the main menu
- Tap on to enter the settings menu
- Navigate to the ''Manual feed'' by tapping on and/or
- Tap on ''Manual feed'' to enter into the Manual feed menu
- Activate the manual feeding by holding the icon. After holding the icon for 30 seconds, the
manual feeding will be automatically deactivated again. If 30 seconds were not enough to refill the
feeder screw, hold the icon again. Repeat it untill the first pellets starts to fall into the burning pot.
Note:
The manual feeding option is only available in heating devices which are equipped with a feeder. The
manual feeding during the operation of the heating device cannot be activated.
If your heating device is equipped with a pressure safety switch, simultaneously with the feeder, the
combustion fan will also be activated.
Checking the time to service
Fumis Premium allows you to check the time when you should contact the service personnel to perform
regular maintenance on your combustion system. This value is read-only and can be modified by authorised
personnel only.
To check the time to service, follow the steps below:
- Touch the screen (if currently in idle mode) to exit from the idle mode. If the display currently is not in
idle mode, skip this step.
- Tap on to enter the temperature menu
- Tap on to enter the main menu
- Tap on to enter the settings menu
- Navigate to the ''Timo to service'' by tapping on and/or
- Tap on ''Timo to service'' to see the remaining Time to service
Note:
When the time to service expires, the Fumis Premium warns you by displaying the A002 alert (Call service
for regular maintenance). The heating device is still operational. To reset this alert, call authorised
personnel.
If your heating device does not require regular maintenance, the Time to service option is skipped in the
settings menu.