Ulma ECO 2 Premium, Installation And Maintenance Manual

Page: 22 / 33

22
- Tap on to enter the settings menu
- Navigate to the ''Display cleaning'' by tapping on and/or
- Tap on ''Display cleaning'' to enter into the Display cleaning menu
- Tap on ''START'' icon to start the 30 seconds countdown
Note
If the heating device turns on automatically (by timer, room thermostat, etc.), the cleaning function gets
interrupted in the moment when the heating device turns ON.
The display cleaning function cannot be activated during the operation of the heating device.
Setting the language
Fumis Premium allows you to choose between different languages.
To set the desired language, follow the steps below:
- Touch the screen (if currently in idle mode) to exit from the idle mode. If the display currently is not in
idle mode, skip this step.
- Tap on to enter the temperature menu
- Tap on to enter the main menu
- Tap on to enter the settings menu
- Navigate to the ''Language'' by tapping on and/or
- Tap on ''Language'' to enter into the Language menu
- Navigate to the desired language by tapping on and/or
- Tap on the language you want to select. The change is saved immediately and appears in the upper left
corner of the screen.
Checking the firmware version
To check the version of the firmware currently installed on the Fumis controller and Fumis Premium user
interface, follow the steps below:
- Touch the screen (if currently in idle mode) to exit from the idle mode. If the display currently is not in
idle mode, skip this step.
- Tap on to enter the temperature menu
- Tap on to enter the main menu