28
ULEAD VIDEOSTUDIO USER GUIDE
Batch capture
Overburdened by a lot of stuff to capture from your DV tape? You can get peace of mind
through VideoStudio’s Batch capture. This new feature captures all the video clips you want
in just one click and saves your time considerably. To do so, simply keep watching the video.
At any time, press the F3 key as the Mark in point and then the F4 key as Mark out. Repeat
press F3 and F4 as many times as you like, as long as you feel you want to capture a particular
section on the DV tape.
Note:
Batch capture can be achieved only when you’re using a DV tape and the IEEE 1394 card for
computer connection.
Play all or only selected
tasks
Previews the selected
tasks before capturing.
Mark in a new task
Uses the current frame
you saw as the starting
point of a task.
Mark out a new task
Uses the current frame
you saw as the ending
point of a task.
Edit the tape’s name
You can give the tasks to be
captured a name. Once they’re
saved to video formatted files,
it’s easy to trace them later.
Tasks list
Displays all the tasks you created in
the timecode format. Click to select
a task. Multiple selection can be
made just as you would in
Windows Explorer.
Start batch capturing from the Tasks list
Captures the listed tasks all at once.
Options page controls
Click to toggle between Capture Settings (Page 1)
and Batch Capture (Page 2). The middle number
indicates the current page number.
Modify a task
Changes the timecode of either the starting or
the ending point.
Clear all tasks
Deletes all tasks on the list.
Cut the selected task(s)
Deletes the selected task(s).