2
Foreword
Precautions for use
1.The size of suction is adjustable. It is perfect when customer feels
suction with no pain. Suggested cooling temperature is 0~3°, best effect is -3°, best
treatment time is 20-30mins. No less than -5°for first-time user.
-8~-10°is applicable only to fat thickness higher than 55mm. Otherwise there may be a
risk of frostbite.
2. Please clean the target area,and keep the skin surface dry. Otherwise it may cause
frostbite.
3. Spread the special antifreeze membrane on target skin area and close to the skin (no
air bubbles or gaps) (Must cover the treatment area).
4. Place the treatment head on the skin covered with membrane (be sure to place it in
the center to prevent misalignment from causing side.
5. Make sure that the membrane is close to the skin (without a lot of air bubbles), then
place the handle in the middle of the membrane (the treatment handle should not touch
the skin directly, otherwise the skin will be frostbitten);
Suggest gently press the handle to make it close to the membrane, the membrane is
close to the skin, click the working button of the handle, and the handle will start to
absorb the skin (do not have a gap, otherwise it will cause air leakage, and the handle
cannot absorb the skin). After the treatment head is sucked, the hand can be slowly
released.
6. If you want to stop the treatment, hold the treatment head by hand to prevent it from
falling down and breaking
（
suggest set an alarm to remind the end time of the
treatment).
7.After treatment, the inside of the treatment head must be thoroughly cleaned (clean
with soft paper or towel).
