12
3 Application
3.1 Treatment process
1)Clean the skin firstly and the skin surface must be dry, otherwise it may cause
frostbite.
2)Place the anti-freeze membrane onto the skin (Must be flattened)
3)Place the treatment head on the skin with anti-freeze membrane (Be sureit is in the
middle to prevent the deflection from causing the insufficient of anti- freeze membrane
and frostbite the skin), then turn on the switch to ad- just the instrument or adsorption
knob on the handle, until the vacuum is suitable for the customer’s vacuum.
4)If you want to stop the treatment, click the work button and hold the treatment
handle with hand, to prevent the handle from falling down and break
5)The inside of the treatment head must be thoroughly cleaned after treatment
(Cleaned with a softer tissue)
6)Please clean the liquid in the filter on time to prevent the liquid from being sucked
into the suction pump and circulating the suction pump (Cleaning method is as below).
A
B
Cleaning method:
1
、
Please turn the filter down in picture A.
2
、
Picture B is the filter cup, please clean the filter with water
3
、
Install the filter after cleaning
Reminder: suggest contact the manufacturer for guidance
3.2 Treatment precautions
1)Please put the handle close to the skin during the treatment, otherwise the fat cannot
