UJK Dovetail Jig Processes
22
To get this level adjust the comb bar, by moving this
towards the back of the jig, away from the user. Undo
the black star locking knobs and adjust the brass depth
wheel clockwise so that the comb will move away from
the user, this adjustment will effect both parts of the
joint, and so try to bear this in mind with how much this
is adjusted and ensure that both sides are adjusted the
same to keep the comb parallel to the work. Re-lock the
comb in place by tightening the black locking knobs
against the brass wheel.
0.2
Fig 56
0.2
Fig 57
Draw front
Draw side
To get this level undo the black star locking knobs and
turn the brass adjustment knobs anti-clockwise to move
the comb towards the user, re-lock the comb in place.
The same rules apply as above.
Ensure that the comb bar is parallel to the
workpiece by using the scribe line as a guide.
Check that everything is retightened.
21. Having done any of these adjustments, it will be
important to re-cut a new test joint from start to finish,
check what effect this has had on the assembly of this
joint and adjust as needed, or proceed to the work item.
Finished Lapped/Half Blind Dovetail Joint
0.2
Fig 58
If the (draw) side material projects from the (draw)
front, see fig 56.
If the (draw) front material over hangs the (draw) side
material, see fig 57
Summary of Contents for 506300
Page 26: ...Exploded Diagram Parts List 26...
