UINICS SP-490 Series Operation Manual Download Page 1 | Manualshive

Page: 1 / 32

background image

【 Operation Manual 】

Compact Dual Digital Meter

SP-490 Series

        Thank you for purchasing this UINICS product.
        Please read this Operation Manual carefully in order to ensure that you use the meter
        safely and correctly.

Product specification, model name 〔Ex.〕

ＳＰ－４９０－Ｆ

                                                          ↑
                                        No code：NPN open collector pulse input
                                        F：Voltage pulse input

！

Caution

For professional use only or designed for use by a licensed electrician only.

！

Attention

Check if the label (model name) of the unit and your desired product specification
correspond before use.

UINICS CO., LTD.

６th.：Sep. ２, 201５ @SP-490CE(6)-1

1
2
3
...
»

Summary of Contents for SP-490 Series

































Reviews:

No comments

Related manuals for SP-490 Series

Brand: UEi Pages: 20

Brand: Hach Pages: 138

Brand: A&D Pages: 102

Brand: Quantel Pages: 2

Brand: TA Instruments Pages: 7

Brand: TA Instruments Pages: 7

Brand: ADA INSTRUMENTS Pages: 27

Brand: LEGRAND Pages: 5

Digital Piano CA750

Brand: Kawai Pages: 76

Brand: EPE Conseil Pages: 3

Brand: Primes Pages: 48

Brand: Hanna Instruments Pages: 25

Brand: Cable Ferret Pages: 16

Brand: YOKOGAWA Pages: 169

Brand: Nahita Pages: 2

Brand: Keysight Pages: 14

Brand: WIKA Pages: 56

Brand: Eaton Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands