UIM UIM-90, User Manual

Page: 20 / 36

UIM-90 (221)
UIM-90 (221/В)
UIM-90 (221/Р)
UIM-90 (221/ВР)
21
To save the settings, simultaneously press and hold pressed (till the
sound beep) buttons and , a message will appear on the LSD display:
,
– press and release button – if "YES" or button – if "NO". The
LCD display will show following:
.
Press and release button , the LCD display will show (if parameter
"Tsf =" set is greater than zero):
,
after which a warning will appear and a red LED indicator will light up:
,
and then inscription U[1]= ХХ.Х kV, where XX.X – changing value of breakdown
voltage. The Oil tester will perform the test in accordance with preset settings.
If the value of the applied voltage exceeds 90 kV, the voltage rise will
stop and a message will appear on the LED display:
.
After the button is pressed, LCD display will show the READY;