UIC Bezel5 Programmer’s Manual
Page.35/166
UDN PM098 Rev. 1.0
Copyright © 2013, Uniform Industrial Corp. All Rights Reserved
Start
Terminal Configuration Setup
(T01 command)
Application Configuration
Setup (T15 command)
Done?
Public key loading
(T03 command)
Done?
Ready for Deployment
Yes
No
Yes
No
Figure 3-1. EMV Configuration command diagram
EMV Transaction - Using the bezel general commands (Protocol 2). There are many transaction
scenarios for EMV transactions. The on-line transaction is shown in the above as one example.
EMV Parameters Maintenance - After the bezel has been deployed, the acquirer may need to
update the EMV parameters such as the public key. The parameter update process is similar to the
EMV initialization. The controller must be able to handle this kind of process to accept the data
from the acquirer. Then converts it to the suitable data format and send to the bezel.
