UHP-1100 SATELLITE ROUTER BOARD
GENERAL DESCRIPTION AND INSTALLATION GUIDE, v3.2
© UHP Networks Inc. 2015
17
www.uhp.net
Figure 5 Router resetting to default procedure
Successful reset will be evidenced by fast and simultaneously flashing indictors ERROR and STATUS.
By default, UHP-1100 router is provided with IP-address 192.168.222.222 with mask 255.255.255.248 (/29).
Respectively, the computer should be provided with an address, e.g. 192.168.222.217 with the same mask.
The default address is not shown in the route Table. And what is more, it disappears after the first saving of the
configuration. Thus the first thing to do, with the Telnet access, is to set a new IP-address (it may be similar to the
default address when required), exit the session, and connect to the new address and only then save the
configuration.
After the first saving of the configuration the ERROR and STATUS indicators stop flashing simultaneously.
Push reset
Push reset
Push reset
Push reset
Factory default reset
Push reset
Normal reset
