uhlmann & zacher CX8936, Operating And Installation Instructions

Page: 15 / 18

CX8936 C
OMMISSIONING AND OPERATION
14
5.5 Resetting the configuration (factory reset)
If you want to reset all the settings, proceed as follows:
Use a screwdriver or a similar tool to turn the rotary switch (6) so that the arrow-
head points to Position 9. Briefly press the button (7) to delete all the saved lock-
ing units and parameters.
5.6 Firmware updates
To update the firmware you have the update tool
“Clex FW Prog” available. Contact your respective Integration partner.
5.7 Signaling
LED Meaning
Blue
slow flashing
Device scans for paired locks
Blue
flashing
BLE activity with connected locking units
Blue
constant lighting up All paired locking units are connected
Blue
rapid flashing Device tries to wake up a locking unit in the "wake on
radio" mode (WOR)
Yellow Button input
Red Active online connection
Green Received bus command
Red/green
flashing alternatingly Connected with the locking unit in service mode
Green constant light-
ing + blue flashing
Service mode
After reset: One-time
all colors consecutive-
ly Device has completed the initialization
5.8 Malfunctions during operation/error signaling
LED Meaning
Red and yellow flash
after a reset; after that
service mode Mode wrong for the available firmware:
Perform a firmware update or set the mode manually.
Yellow lights constant-
ly after a reset Micro-controller of the device is in the boot loader. Per-
form a suitable firmware update.