background image

CX2936 

A

BOUT THIS DOCUMENT

 

 

1

 

About this document 

These operating and installation instructions describe the CX2936 Clex private 
wireless switch module with Bluetooth® Low Energy (short: CX2936). They are 
part of the product and contain important information required for correct opera-
tion and maintenance. 
These operating and installation instructions apply for all versions of the CX2936 
and are intended both for specialist personnel responsible for assembly and dis-
assembly and for end customers. 

 

To ensure trouble-free and safe operation, read these operating and installa-
tion instructions carefully and observe the information contained there before 
putting the door handle into operation. 

 

Keep the operating and installation instructions. 

 

After installation, give the instructions to the end customer and familiarize 
them with operation. 

Uhlmann & Zacher GmbH accepts no liability for malfunctions, such as impossi-
ble access to injured persons, operational malfunctions, damage to property or 
other damage resulting from non-observance of these operating and installation 
instructions or from incorrectly configured door handles. 

 

If you still have any questions after reading these operating and installation 
instructions, please contact your specialist dealer or Uhlmann & Zacher 
GmbH directly. 

1.1

 

Warnings 

Warning notices warn of hazards that may occur when using the door handle. 
There are two hazard levels, recognizable by the signal word: 

Signal word 

Meaning 

CAUTION 

Indicates a low-risk hazard that may result in minor or moderate 
injury if not avoided 

ATTENTION 

Indicates a hazard that results in damage to property 

1.2

 

Symbols 

The following symbols may appear in this manual: 

 

This symbol marks an instruction that has to be carried out by the user. 

 

This symbol marks an entry in a list. 

This symbol indicates useful and important information. 
 
 

 

 
 
 
 
 

 

Summary of Contents for CX2936



















Reviews: