CX2936
C
OMMISSIONING AND OPERATION
12
5
Commissioning and operation
5.1
Connecting the locking unit
Perform the following steps to connect a locking unit with the wireless switch
module:
Bring the locking unit which you want to connect into the service mode by
holding the service key in front of the locking unit.
Use a screwdriver or a similar tool to turn the rotary switch (6) so that the
arrowhead points to Position 8. Then briefly press the button (7) to switch to
the pairing mode and teach in the locking unit within reach.
6) Rotary switch
7) Button
8) LEDs
If successful, the green LED lights up several times and the lock leaves the service
mode directly. If not successful, the red LED lights up several times and the lock
remains in the service mode.
The yellow LED flashes additionally to confirm the button input. The blue LED
flashes to signal the BLE activity.
Turn the rotary switch back to the home position.
Rotary switch position
Function
0
Home position
4
Briefly press the button (7) to set the wireless switch
module into service mode.
8
Briefly press the button (7) to perform the pairing of the
wireless switch module with the locking unit that is in
reach and in service mode or to delete an existing
paired locking unit.
9
Briefly press the button (7) to delete all the saved lock-
ing units and parameters.
Any
If you keep the button (7) pressed longer than 4 s and
then release it, the wireless switch module switches to
the service mode (as at Position 4).
