Ugur USS 85, Operating Manual

Page: 41 / 162

EN
F- THINGS THAT MUST BE DONE BEFORE CALLING AUTHORIZED
SERVICE
Troubleshooting
The failures stated here are basic failures and problems, which can be resolved by your own with the help of the
manual. If the solutions given here do not fit to your problem, absolutely consult to an authorized service.
CAUTION!
Repair works to be carried out on your product must be carried out by competent people. Any application to be
carried out by you may harm you, your employee or customer. In case of a huge failure, consult to Uğur Customer
Care or Authorized Uğur Service.
Troubleshooting Possible Solution Result
Dispenser is not work-
ing. (No sound or only
fan sound comes from
the product.)
It may be due to the thermostat. It will run again when reached
to the suitable temperature.
Not plugged in. Check the plug.
The fuse may be blown or broken
down.
Check your fuse
Condenser lamella may be ob-
structed or get dirty.
Clean the condenser lamellas.
Dispenser internal tem-
perature is high.
External ambient temperature
may be very high
Move your dispenser to a place
where the external ambient
temperature is lower.
No gap may be left between the
dispenser and the wall
Leave a gap of at least 15 cm
between the wall and the
dispenser
Ventilation shutters are obstructed
or its front is prevented.
Check whether the front of the
ventilation shutters is ob-
structed
It may have been exposed to
excessive external wind.
Move your dispenser to a place
that it would not be subject to
wind.
Wrong thermostat setting may be
made.
Re-set the thermostat.
41