Instructions for use (rev 05/18)
e.ON SINTER
UGIN DENTAIRE
43
8.1.
Heating element replacement
Observe these conditions for replacing heating elements:
-
preferably, be at room temperature (+15°C / +25°C), the heating elements are very sensitive to
temperature;
-
handle them carefully;
-
keep all elements of heating elements: heating elements and cushioning foam pad protecting.
Steps to heating element replacement:
1.
Open the furnace upper cover
(unscrew)
2.
Unscrew the electrical contacts of heating
elements with a wrench (supplied as an
accessory)
3.
Repeat step 2 for all the heating elements
to replace
4.
Unscrew the support elements of heating
element with a wrench (supplied as an
accessory)
5.
Remove carefully the
cushioning foam pad
protecting heating elements.
Lift carefully the heating
element with the elements
protecting.
Summary of Contents for e.ON SINTER
Page 2: ......
