3
EN
Do not use the appliance if it has dam-
aged or worn seals.
Do not use an appliance which is
leaking, damaged or which does not
operate properly
THE PRODUCT CONTAINS:
1) Metal mesh
2) Decorative stones
3) Lantern
USE
1. Unscrew the thread located at the
bottom of the lantern.
2. Insert the gas canister into the
thread. Gently screw the thread with
the canister up against the metal pin to
pierce the canister.
3. Make sure that the thread is screwed
on correct. NEVER use tools to screw or
unscrew the thread!
4. Put the decorative stones and metal
mesh in position.
5. Turn the knob and light the lantern
with a lighter.
Warning!
When gas
ignites, flame may jump from accumu-
lated gas in the air, this is normal.
6. Turn the knob in the opposite di-
rection to shut off the gas supply and
extinguish the flame.
NB: Always leave the gas canister in
the lantern and only remove it when
replacing it.
Warning:
If the burner cannot be lit,
turn off the regulator. Wait five minutes
before you try to light it again by fol-
lowing the ignition procedure.
