UFREE SCOOTER www.scooter-manufacturer.com
4
NOTES
BEFORE you ride, thoroughly inspect the machine to ensure that no parts are
loose or damaged. Do not use it until adjustments or repairs have been made.
New engine break-in period is a couple of hours and avoid full throttle operation
during this period.
Position your feet in a comfortable location and balance your body with the left
leg slightly behind the right leg and bearing most of your weight, lean back
slightly and your Scooter will move like the smoothness of water skiing! When you
accelerate or climb hills you will need to lean forward to keep the front wheel on
the ground. When sudden brakes occur you will need to lean to keep the rear wheel
on the ground. Do not touch the muffler or cylinder. These parts are extremely hot
after operation and remain hot for a short time after the equipment is turned off.
PLEASE INJECT LUBRICATING OIL INTO THE OIL HOLE LOCATED IN
THE TOP OF THE PLASTIC CHAIN COVER TO PROTECT THE CHAIN
BEFORE YOU RUN THE ENGINE.
SAFETY DRIVING
Although the engine noise has been reduced, it is difficult to hear approaching
vehicles so you must take care before turning. The rider has been designed to
operate on any dry, hard and smooth surfaces. Wet, oily and uneven surfaces
should be avoided at all times.
STARTING
BEFORE riding, you should start the engine firstly by pulling the "pull start" lead,
with one foot placed on the deck. This may require a few "pulls" to get the engine
started. When the engine has started you may accelerate slightly and at the same time
place your other foot onto the deck. This process may need practice at first until you
have mastered your balance.
