UFREE SCOOTER www.scooter-manufacturer.com
4. To finish the assembly, you need to put the fuse into the fuse socket.
Remove the cover of the fuse socket and put the fuse on the cover, the
re-close the cover. WARNING: when putting on the fuse, please make
sure the power key switch turns to OFF. (Fig 4)
5. The mirror can be installed easily. Find the proper position, put the
screw on and the tight the screw tightly. Adjust the mirror in right angle.
(Fig 5)
Install of the mirror: put the socket on the proper position of the
handle bar. Use the screw at the end of the handle mirror to tight up
and fixed the mirror position. Adjust the angle of the mirror.
6. The basket can be installed as following, .fix the screws on the fork tube.
Make sure the height is correct. (the bottom of the basket is just over the
plastic cover. (Fig 6)
