background image

OPERATION

9

UFO

 

LIGHTING

MANUAL

 

OPERATION

LOCAL

 

WHITE

 

LIGHT

 

DIMMING

All Sirius models in the range can be manually controlled as detailed in the following sections. 
 

Note:

 For all manual operation modes, dip switch 10 must be set to on.

During normal manual white light operation, the illuminator can be dimmed from 0 to 100% 
using the manual dimming control on the side panel.

EMERGENCY

 

WHITE

 

LIGHT

 

DIMMING

During normal manual white light operation the emergency light configured illuminator can be 
dimmed from maximum light at 0%, to no light at 10% then again up to maximum light at 100% 
using the manual dimming control on the side panel.

DECORATIVE

 

COLOR

 

OR

 

TWINKLE

 

WHEEL

 

CONTROL

 - 

WITHOUT

 

SENSOR

During normal manual decorative operation the illuminator can be dimmed from 0 to 100% 
using the manual dimming control and the motor can be controlled from stop to 5 speeds  
(see table below) using the push button manual motor control on the side panel. 
 

Note:

 When manually selecting stop (switch position 6) the decorative wheel will stop instantly 

on a random color (color wheel) or a random section of the twinkle wheel

Switch Posi

ti

on

1

2

3

4

5

6

Speed (RPM)

0.5

1.2

2.4

4

7.5

Stop

REMOTE

 

WHITE

 

LIGHT

 

DIMMING

During remote manual white light operation, the illuminator can be dimmed from 0 to 100% 
using the remote dimming control. 
 

Note

: For remote manual dimming operation, dip switch 10 on the illuminator must be set to 

on and the local manual dimming control on the side of the illuminator must be turned to mini-
mum (fully counter clockwise) 

Summary of Contents for Sirius SIRCW





















Reviews: